Connect the SPP-R200III printer to the Digital Sign In App so students can receive a printed late ticket.

Before you start

• Update the Digital Sign In App to the latest version.
• Charge the printer and switch it on.
• Keep the printer close to the tablet.
• Allow the app to use Bluetooth or nearby devices when prompted.

Need to arrange late-ticket printing for your school? Contact staffsupport@uniqueschools.ie or 01 886 9458.

1. Pair the printer with the tablet

This is normally a one-time setup.

1. Open the tablet’s Settings.
2. On iPad, open Bluetooth. On Android, look for Bluetooth, Connected devices or Connections.
3. Turn Bluetooth on and choose Pair new device if shown.
4. Select SPP-R200III.
5. If asked for a passcode, enter 0000 and confirm pairing.
6. Wait for the printer to show as paired or connected.

2. Enable printing in the app

1. Open the Digital Sign In App.
2. From the Sign In/Sign Out screen, tap the Settings icon at the top right.
3. Turn on Enable Late Receipt Printing.
4. Check that Enable Late Option is also on if required.

If the printing option is missing, update the app or contact support.

3. Connect the printer inside the app

1. From the app’s settings, tap the Printer icon at the top right.
2. On Printer Setup, wait for nearby devices. Tap Scan if needed.
3. Select SPP-R200III and wait for an active connection.
4. Tap Back twice to return to the Sign In/Sign Out screen.

Daily check

Charge the printer each night. Each morning, switch it on and check the connection in Printer Setup, then return the app to the Sign In/Sign Out screen.

If the printer has switched off or shut down automatically, you may need to reconnect it inside the app.

Troubleshooting

The printer does not appear, or “Connection Lost” appears

1. Check that the printer is on and charged.
2. Check the tablet’s Bluetooth pairing.
3. Check the app’s Bluetooth permission (see below).
4. Open Printer Setup, tap Scan and select SPP-R200III again.
5. If needed, restart the printer and try again.

Check Bluetooth permission

• iPad: Settings → Privacy & Security → Bluetooth → enable the Digital Sign In App. If it is not listed, reopen the app and respond to its Bluetooth permission prompt.
• Android: Settings → Apps → Digital Sign In App → Permissions → allow Nearby devices or Bluetooth. Names vary by device and Android version.

You cannot sign in, or setup still fails

Contact staffsupport@uniqueschools.ie or 01 886 9458. Include the device type and the message shown.